House number 22 - corner
House Number in Variant 22 - corer. Clean modern design, simplicity, and elegance. We use high-quality material with a thickness of 2-3 mm depending on the chosen size. It's simple: select the size, material, method of installation including the option of LED backlighting. Write your address in the note and leave the rest to us.
| Category: | House numbers - corner |
|---|
_(1)_en.png?64df6d48)
_en.png?64df6e43)
Material:
Iron - coated in matte or glossy black
Stainless steel
Cor-ten: a novelty - gradually rusting steel with a beautiful pattern.
Mounting:
Adhesive - the sign is glued to the facade. The sign does not have mounting holes.
Using screws - the sign is attached by drilling, using anchors and screws. For black iron signs, we provide black countersunk head screws in the mounting kit. For stainless steel and Cor-ten signs, we supply decorative stainless steel screws.
Standoff mounting (3D) - the sign is attached by drilling, using anchors and screws. However, the mounting kit includes a set of plastic “spacers.” The spacers ensure the sign is set 30-50mm away from the wall, depending on the size of the sign.
LED backlighting - signs mounted with a standoff can be backlit using LED strips. The LED strip is connected via USB. It's ideal to consider this and install a USB socket and switch at the intended control point for the strip.
If you have any questions, contact us: info@3dlightwork.com
Be the first who will post an article to this item!